maintenance of the bronze aluminium windows

PRE：Insulating Glass Market 2022 - Bringing Opportunities for Future Growth

NEXT：Warm edge sealing system of insulated glazing

Maintenance and maintenance of the bronze aluminium windows,let the aluminium window company tell you how to do it

1. aluminium window company tell us,during the use of aluminum alloy doors and bronze aluminium windows, the action should be light, and the push and pull should be natural; if there is any difficulty, do not pull or push, and troubleshoot first. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to pull out. Keep the door frame clean, especially the sliding groove. A vacuum cleaner can be used to remove the dust accumulation in the groove and the door seal top.
2. When cleaning aluminum alloy doors and bronze aluminium windows, people should not step on the aluminum frame or hold the frame for support.

3. For aluminum alloy doors and windows, use a soft cloth dampened with water or neutral detergent. Do not use ordinary soap and washing powder, let alone detergent with strong acid and alkali such as decontamination powder and toilet detergent.

4. After a rainy day, dry the wet glass and door and window frames in time, and pay special attention to dry the water in the chute. If the chute is used for a long time, the friction will increase. You can add a little engine oil or apply a layer of wax oil.
5. Check the joints of the aluminum alloy frame frequently, tighten the bolts in time, and replace the damaged parts. The vulnerable parts of aluminum alloy doors and windows, such as positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible.

6. The sealing top and glass glue seal are the key structures to ensure the sealing and heat preservation of doors and windows. If they fall off, they should be repaired and replaced in time.

7. Frequently check the joints of the aluminum alloy frame and the wall. If it becomes loose over time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement to seal with epoxy super glue,according to the aluminium window company